Models

Mark I, the British worldwide first ever built armoured vehicle used in warfare is our higlight. Totally made of metal (stainless steel and brass) it is offered on a scale of 1:10. In addition, you will find in this section a model cannon of the mark I.

Stationary model Mark I, scale 1:10

8.940,00
inkl. MwSt.
Versandkosten gelten nur für Deutschland
In den Warenkorb

For all those that feel attached to armoured vehiceles this model of the Mark I (male version) is a real high-light. Great care was taken to produce this absolute true copy of the original tank. The model is composed of more than 5000 parts.

Only high quality materials were considered for use.

All sheet-metal parts are made of stainless steel, are laser-cut and welded together using the TIG-process, or riveted using aluminium rivets.

The castings are all made of high-strength brass employing a process with wax templates as intermediates.

As with the original the drive consists, of 54 CNC lathe formed chain bearing wheels, two lead- and two drive wheels.

The bearings of the wheels are made of brass, the axles are stainless steel.

Optionally the Mark I can be equiped with suitable electromotors that via s special metal chain conect with the driving wheels.

All the doors and lids are on hinges and can therefore be opened and closed (eleven openings to enable sight, two entrance doors at the sponsons one at the rear-end of the tank, a roof opening, three machine gun openings and finally two for the driver`s orientation).

The accurate copies of the two wheels connected to the tanks rear end had the purpose to improve the manoeuvering of the vehicle in easy terrain.

The two cannons in the sponsons are vertically and horizontally adjustabel and if so required can be supplemented with remote control.

 

Speeches

 

Mark I

 

Specifications:

Overall length:                                                              990 mm / 39 inch

Length without two rear weels:                                       805 mm / 31,7 inch.

Width:                                                                         419 mm / 16,5 inch

Height:                                                                        251 mm / 9,9 inch

Chain width:                                                                 52 mm / 2,05 inch

Nummber of chain links:                                                180 pieces

Weight without batterie:                                                 ca. 50 kg.

Number of parts:                                                           over 5000

Mehr anzeigen >>


Stationary model Mark I, scale 1:10

8.940,00inkl. MwSt.
Versandkosten gelten nur für Deutschland

For all those that feel attached to armoured vehiceles this model of the Mark I (male version) is a real high-light. Great care was taken to produce this absolute true copy of the original tank. The model is composed of more than 5000 parts.

Only high quality materials were considered for use.

All sheet-metal parts are made of stainless steel, are laser-cut and welded together using the TIG-process, or riveted using aluminium rivets.

The castings are all made of high-strength brass employing a process with wax templates as intermediates.

As with the original the drive consists, of 54 CNC lathe formed chain bearing wheels, two lead- and two drive wheels.

The bearings of the wheels are made of brass, the axles are stainless steel.

Optionally the Mark I can be equiped with suitable electromotors that via s special metal chain conect with the driving wheels.

All the doors and lids are on hinges and can therefore be opened and closed (eleven openings to enable sight, two entrance doors at the sponsons one at the rear-end of the tank, a roof opening, three machine gun openings and finally two for the driver`s orientation).

The accurate copies of the two wheels connected to the tanks rear end had the purpose to improve the manoeuvering of the vehicle in easy terrain.

The two cannons in the sponsons are vertically and horizontally adjustabel and if so required can be supplemented with remote control.

 

Speeches

 

Mark I

 

Specifications:

Overall length:                                                              990 mm / 39 inch

Length without two rear weels:                                       805 mm / 31,7 inch.

Width:                                                                         419 mm / 16,5 inch

Height:                                                                        251 mm / 9,9 inch

Chain width:                                                                 52 mm / 2,05 inch

Nummber of chain links:                                                180 pieces

Weight without batterie:                                                 ca. 50 kg.

Number of parts:                                                           over 5000


Mehr anzeigen >>


Driving model Mark I, scale 1:10

9.690,00
inkl. MwSt.
Versandkosten gelten nur für Deutschland
In den Warenkorb

Addition of an electronic steering mechanism, a battery, two electric motors.

Velocity: ca. 600 m / h.

Lifting, lowering, turning the two canons.

Addition of sound- and smoke devices.

 

If interested please contact for price, delivery time, freight charges and conditions of payment.

Mehr anzeigen >>


Driving model Mark I, scale 1:10

9.690,00inkl. MwSt.
Versandkosten gelten nur für Deutschland

Addition of an electronic steering mechanism, a battery, two electric motors.

Velocity: ca. 600 m / h.

Lifting, lowering, turning the two canons.

Addition of sound- and smoke devices.

 

If interested please contact for price, delivery time, freight charges and conditions of payment.


Mehr anzeigen >>


Cannon Mark I, scale 1:10

373,00
inkl. MwSt.
Versandkosten gelten nur für Deutschland
In den Warenkorb

Description: It is an accurate copy of the original 57 mm Cannon used in the „male“ Mark I

 

Cannon consist of: gunbarrel upper- and undercarriage, cradle with gunbarrel brake, bottom piece with closure, target and firing device with shoulder support.

As with the original the following functions are possible:

- Opening and closeing of the barrel,

- Rotateing, raiseing and lowering the barrel,

- Using levers the above functions can be locked,

- Gun barrel is slidably mounted on the cradle

The gun ist mounted on a wooden platte.

 

Technical data:

Length over all Cannon Mark I: 270 mm

Weight Cannon Mark I: ca. 830 g

Material: Cannon is made of high strength brass (CuZn34Al2).

Screws, springs, cap nuts and slices: High quality stainless steel.

Order Nr.: MK-10-001

Mehr anzeigen >>


Cannon Mark I, scale 1:10

373,00inkl. MwSt.
Versandkosten gelten nur für Deutschland

Description: It is an accurate copy of the original 57 mm Cannon used in the „male“ Mark I

 

Cannon consist of: gunbarrel upper- and undercarriage, cradle with gunbarrel brake, bottom piece with closure, target and firing device with shoulder support.

As with the original the following functions are possible:

- Opening and closeing of the barrel,

- Rotateing, raiseing and lowering the barrel,

- Using levers the above functions can be locked,

- Gun barrel is slidably mounted on the cradle

The gun ist mounted on a wooden platte.

 

Technical data:

Length over all Cannon Mark I: 270 mm

Weight Cannon Mark I: ca. 830 g

Material: Cannon is made of high strength brass (CuZn34Al2).

Screws, springs, cap nuts and slices: High quality stainless steel.

Order Nr.: MK-10-001


Mehr anzeigen >>