Chains World War II, scale 1:8

The scale can be varied. The chains are made of a special brass having high strength and high abrasion- and corrosion-resistance.

All chain links are 100% true copies of the original. Following a measuring of the original link a master copy is made by a CNC-moulding cutter process.

Due to the weight of the chains (a set for the Panther tank having a scale of 1:10 weights 4 kg) the chains show the same sag as does the original.

For all chains high-grade steel pins are used.

Of course, we can produce on request, other standards.

Chain for the Chassis of Mark V, "Panther", scale 1:8

1.849,00
inkl. MwSt.
Versandkosten gelten nur für Deutschland
In den Warenkorb

Description:

It is an accurate copy of the original chain Kgs 64/660/150 even showing the structure of the sand-moulding process. As with the original are the lead cogs perforated.

The delivered set of two chains consists of 2 x 86 chain links and 2 x 6 as reserve plus the necessary pins.

The two chain are completely assembled.

In total the set consists of 368 parts.

The chains are suitable for: Pz.Kpfw. V „Panther“ Ausf. D,A,G, F (Sd.Kfz. 171), Jgd.Pz. V „Jagdpanther“ (Sd.Kfz. 173) und Bergepanzer „Panther“ (Sd.Kfz. 179).

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data:

Width links with pin: ca. 83 mm

Weight link and pin: ca. 47,20 g

Total weight of chain: ca. 8,6 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order Nr.: PA-08-001

Mehr anzeigen >>


Chain for the Chassis of Mark V, "Panther", scale 1:8

1.849,00inkl. MwSt.
Versandkosten gelten nur für Deutschland

Description:

It is an accurate copy of the original chain Kgs 64/660/150 even showing the structure of the sand-moulding process. As with the original are the lead cogs perforated.

The delivered set of two chains consists of 2 x 86 chain links and 2 x 6 as reserve plus the necessary pins.

The two chain are completely assembled.

In total the set consists of 368 parts.

The chains are suitable for: Pz.Kpfw. V „Panther“ Ausf. D,A,G, F (Sd.Kfz. 171), Jgd.Pz. V „Jagdpanther“ (Sd.Kfz. 173) und Bergepanzer „Panther“ (Sd.Kfz. 179).

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data:

Width links with pin: ca. 83 mm

Weight link and pin: ca. 47,20 g

Total weight of chain: ca. 8,6 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order Nr.: PA-08-001


Mehr anzeigen >>


Chains for the chassis of Mark IV "Tiger I", scale 1:8

1.930,00
inkl. MwSt.
Versandkosten gelten nur für Deutschland
In den Warenkorb


 

What is the Cause of the unsymmetric geometry of the Tiger I chain links?

The Tank VI Design B (VK 3601(H)) was the precursor of the Tiger I. This armoured vehicle weighed ca. 36 tons (metric) and had a chain width of 520 mm. It was found that this tank was not able to support a 8,8 cm canon. Therefore further persuance of this type was abandoned. To shorten the time to develope the Tiger I many of the Mark VI Design B components were incorporated in the Tiger I. One of these was the chain as it was too small for the 56 tons Tiger I. Therefore on one side the links were broadened by 205 mm and reinforcement bars added at the position of the cog weel contact.

 

Description:

Accurate copy of the original chain Kgs 63/725/130 with casted diametrical studs. Sand-casting structure. As with the original are the lead cogs perforated. Copy of the reinforcement bar

The delivered set of two chains consists of 2 x 96 chain links and 1 x 12 as reserve plus the necessary pins.

The two chain are completely assembled. In total the set consists of 408 parts.

The chains are suitable for: Pz.Kpfw. Tiger I, Ausf. E, (Sd.Kfz. 181), Stu.Pz. VI, „Sturmtiger“

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data:

Width links with pin: ca. 90,6 mm

Weight link and pin: ca. 60 g

Total weight of chain: ca. 12,24 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel

Order Nr.: T1-08-001

 

Mehr anzeigen >>


Chains for the chassis of Mark IV "Tiger I", scale 1:8

1.930,00inkl. MwSt.
Versandkosten gelten nur für Deutschland


 

What is the Cause of the unsymmetric geometry of the Tiger I chain links?

The Tank VI Design B (VK 3601(H)) was the precursor of the Tiger I. This armoured vehicle weighed ca. 36 tons (metric) and had a chain width of 520 mm. It was found that this tank was not able to support a 8,8 cm canon. Therefore further persuance of this type was abandoned. To shorten the time to develope the Tiger I many of the Mark VI Design B components were incorporated in the Tiger I. One of these was the chain as it was too small for the 56 tons Tiger I. Therefore on one side the links were broadened by 205 mm and reinforcement bars added at the position of the cog weel contact.

 

Description:

Accurate copy of the original chain Kgs 63/725/130 with casted diametrical studs. Sand-casting structure. As with the original are the lead cogs perforated. Copy of the reinforcement bar

The delivered set of two chains consists of 2 x 96 chain links and 1 x 12 as reserve plus the necessary pins.

The two chain are completely assembled. In total the set consists of 408 parts.

The chains are suitable for: Pz.Kpfw. Tiger I, Ausf. E, (Sd.Kfz. 181), Stu.Pz. VI, „Sturmtiger“

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data:

Width links with pin: ca. 90,6 mm

Weight link and pin: ca. 60 g

Total weight of chain: ca. 12,24 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel

Order Nr.: T1-08-001

 


Mehr anzeigen >>


Chains for the Jgd.Pz. 38 t "Hetzer", scale 1:8

969,00
inkl. MwSt.
Versandkosten gelten nur für Deutschland
In den Warenkorb


 

Description:

It is an accurate copy of the original chain.

The delivered set of two chains consists of 2 x 96 chain links and 1 x 7 as reserve plus the necessary pins.

The two chain are completely assembled.

In total the set consists of 398 parts.

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data:

Width links with pin: ca. 44 mm

Weight link and pin: ca. 13,2 g

Total weight of chain: ca. 2,6 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order Nr.: HE-08-001

Mehr anzeigen >>


Chains for the Jgd.Pz. 38 t "Hetzer", scale 1:8

969,00inkl. MwSt.
Versandkosten gelten nur für Deutschland


 

Description:

It is an accurate copy of the original chain.

The delivered set of two chains consists of 2 x 96 chain links and 1 x 7 as reserve plus the necessary pins.

The two chain are completely assembled.

In total the set consists of 398 parts.

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data:

Width links with pin: ca. 44 mm

Weight link and pin: ca. 13,2 g

Total weight of chain: ca. 2,6 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order Nr.: HE-08-001


Mehr anzeigen >>


Chain for the Chassis of T34/76 tank, scale 1:8

1.154,00
inkl. MwSt.
Versandkosten gelten nur für Deutschland
In den Warenkorb

Description:

Accurate copy of the original chain - consisting of lead and connection links. The lead cogis, as with the original hollow castings.

The delivered set of two chains consists of 2 x 76 chain links and 1 x 6 as reserve plus the necessary pins. The two chain are completely assembled. In total the set consists of 316 parts.

The chains are suitable for: T34/76, T34/85, SU-85, SU-100 und SU-122.

 

Technical data:

Width links with pin: ca. 62,0 mm

Weight lead link and pin: ca. 34,0 g

Weight connection link and pin: ca. 26,5 g

Total weight of chain: ca. 4,8 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order Nr.: T3-08-001

Mehr anzeigen >>


Chain for the Chassis of T34/76 tank, scale 1:8

1.154,00inkl. MwSt.
Versandkosten gelten nur für Deutschland

Description:

Accurate copy of the original chain - consisting of lead and connection links. The lead cogis, as with the original hollow castings.

The delivered set of two chains consists of 2 x 76 chain links and 1 x 6 as reserve plus the necessary pins. The two chain are completely assembled. In total the set consists of 316 parts.

The chains are suitable for: T34/76, T34/85, SU-85, SU-100 und SU-122.

 

Technical data:

Width links with pin: ca. 62,0 mm

Weight lead link and pin: ca. 34,0 g

Weight connection link and pin: ca. 26,5 g

Total weight of chain: ca. 4,8 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order Nr.: T3-08-001


Mehr anzeigen >>