Chains World War II, scale 1:10

The scale can be varied. The chains are made of a special brass having high strength and high abrasion- and corrosion-resistance.

All chain links are 100% true copies of the original. Following a measuring of the original link a master copy is made by a CNC-moulding cutter process.

Due to the weight of the chains (a set for the Panther tank having a scale of 1:10 weights 4 kg) the chains show the same sag as does the original.

For all chains high-grade steel pins are used.

Of course, we can produce on request, other standards.

Chain set Germany Tanks of the Second World War, scale 1:10

29,50
inkl. MwSt.
Versandkosten gelten nur für Deutschland
In den Warenkorb

Very convincingly, the development of this set shows an analogy to the development of the German tanks during the war. In the early phase a link of the largest tank weighed about 9 kg with a chain-width of 380 mm. Towards the end of the war the main link of the King Tiger (Königstiger) weighed about 35 kg and had a width of 800 mm. Seeing the growth of the chain it is easy to imagine the fundamental changes in the development of the tanks.

 

Description of the set:

Accurate copies of the original chain links with the sand - structured surfaces. The set consists of five different link, one each for Mark IV, Panther, Tiger I and a main-link and a connection-link of Tiger II. Technical data:

Weight Cain set: ca. 113,0 g

Links are made of high strength brass (CuZn34Al2).

 

Order Nr.: KS-10-001

Mehr anzeigen >>


Chain set Germany Tanks of the Second World War, scale 1:10

29,50inkl. MwSt.
Versandkosten gelten nur für Deutschland

Very convincingly, the development of this set shows an analogy to the development of the German tanks during the war. In the early phase a link of the largest tank weighed about 9 kg with a chain-width of 380 mm. Towards the end of the war the main link of the King Tiger (Königstiger) weighed about 35 kg and had a width of 800 mm. Seeing the growth of the chain it is easy to imagine the fundamental changes in the development of the tanks.

 

Description of the set:

Accurate copies of the original chain links with the sand - structured surfaces. The set consists of five different link, one each for Mark IV, Panther, Tiger I and a main-link and a connection-link of Tiger II. Technical data:

Weight Cain set: ca. 113,0 g

Links are made of high strength brass (CuZn34Al2).

 

Order Nr.: KS-10-001


Mehr anzeigen >>


Chain for the Cassis of Mark I "Panzer I", Design A, scale 1:10

516,00
inkl. MwSt.
Versandkosten gelten nur für Deutschland
In den Warenkorb

Description:

It is an accurate copy of the original even showing the structure of the sand-moulding process.

 

The delivered set of two chains consists of 2 x 84 chain links and 2 x 2 as reserve plus the necessary pins. The two chain are completely assembled. In total the set consists of 342 parts.

 

The chains are suitable for: Pz.Kpfw. I Ausf. A (Sd.Kfz. 101). A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data:

Width links with pin: ca. 28 mm

Weight link and pin: ca. 2,5 g

Total weight of chain: ca. 0,43 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order Nr.: P1-10-001

Mehr anzeigen >>


Chain for the Cassis of Mark I "Panzer I", Design A, scale 1:10

516,00inkl. MwSt.
Versandkosten gelten nur für Deutschland

Description:

It is an accurate copy of the original even showing the structure of the sand-moulding process.

 

The delivered set of two chains consists of 2 x 84 chain links and 2 x 2 as reserve plus the necessary pins. The two chain are completely assembled. In total the set consists of 342 parts.

 

The chains are suitable for: Pz.Kpfw. I Ausf. A (Sd.Kfz. 101). A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data:

Width links with pin: ca. 28 mm

Weight link and pin: ca. 2,5 g

Total weight of chain: ca. 0,43 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order Nr.: P1-10-001


Mehr anzeigen >>


Chain for the Cassis of Mark I "Panzer I", Design B, scale 1:10

612,00
inkl. MwSt.
Versandkosten gelten nur für Deutschland
In den Warenkorb

Description:

It is an accurate copy of the original even showing the structure of the sand-moulding process.

The delivered set of two chains consists of 2 x 100 chain links and 2 x 2 as reserve plus the necessary pins. The two chain are completely assembled. In total the set consists of 406 parts.

 

The chains are suitable for: Pz.Kpfw. I Ausf. B (Sd.Kfz. 101). A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data:

Width links with pin: ca. 28 mm

Weight link and pin: ca. 2,5 g

Total weight of chain: ca. 0,51 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order Nr.: P1-10-A01

Mehr anzeigen >>


Chain for the Cassis of Mark I "Panzer I", Design B, scale 1:10

612,00inkl. MwSt.
Versandkosten gelten nur für Deutschland

Description:

It is an accurate copy of the original even showing the structure of the sand-moulding process.

The delivered set of two chains consists of 2 x 100 chain links and 2 x 2 as reserve plus the necessary pins. The two chain are completely assembled. In total the set consists of 406 parts.

 

The chains are suitable for: Pz.Kpfw. I Ausf. B (Sd.Kfz. 101). A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data:

Width links with pin: ca. 28 mm

Weight link and pin: ca. 2,5 g

Total weight of chain: ca. 0,51 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order Nr.: P1-10-A01


Mehr anzeigen >>


Chain for truck 2 t "Maultier", scale 1:10

474,00
inkl. MwSt.
Versandkosten gelten nur für Deutschland
In den Warenkorb

Description:

It is an accurate copy of the original even showing the structure of the sand-moulding process.

 

The delivered set of two chains consists of 2 x 77 chain links and 1 x 2 as reserve plus the necessary pins. The two chain are completely assembled. In total the set consists of 312 parts.

 

The chains are suitable for: truck 2 t „Maultier“ (Sd.Kfz. 3).

 

Technical data:

Width links with pin: ca. 28 mm

Weight link and pin: ca. 2,5 g

Total weight of chain: ca. 0,39 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order Nr.: P1-10-B01

Mehr anzeigen >>


Chain for truck 2 t "Maultier", scale 1:10

474,00inkl. MwSt.
Versandkosten gelten nur für Deutschland

Description:

It is an accurate copy of the original even showing the structure of the sand-moulding process.

 

The delivered set of two chains consists of 2 x 77 chain links and 1 x 2 as reserve plus the necessary pins. The two chain are completely assembled. In total the set consists of 312 parts.

 

The chains are suitable for: truck 2 t „Maultier“ (Sd.Kfz. 3).

 

Technical data:

Width links with pin: ca. 28 mm

Weight link and pin: ca. 2,5 g

Total weight of chain: ca. 0,39 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order Nr.: P1-10-B01


Mehr anzeigen >>


Chain for the Chassis of Mark I "Panzer II", Design A, B, C, F scale 1:10

680,00
inkl. MwSt.
Versandkosten gelten nur für Deutschland
In den Warenkorb

Description:

It is an accurate copy of the original even showing the structure of the sand-moulding process.

The delivered set of two chains consists of 2 x 106 chain links and 2 x 2 as reserve plus the necessary pins.

The two chain are completely assembled.

In total the set consists of 432 parts.

The chains are suitable for: Pz.Kpfw. I Ausf. B (Sd.Kfz. 101).

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data: M10

Width links with pin: ca. 28 mm

Weight link and pin: ca. 2,5 g

Total weight of chain: ca. 0,51 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order Nr.: P2-10-001

Mehr anzeigen >>


Chain for the Chassis of Mark I "Panzer II", Design A, B, C, F scale 1:10

680,00inkl. MwSt.
Versandkosten gelten nur für Deutschland

Description:

It is an accurate copy of the original even showing the structure of the sand-moulding process.

The delivered set of two chains consists of 2 x 106 chain links and 2 x 2 as reserve plus the necessary pins.

The two chain are completely assembled.

In total the set consists of 432 parts.

The chains are suitable for: Pz.Kpfw. I Ausf. B (Sd.Kfz. 101).

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data: M10

Width links with pin: ca. 28 mm

Weight link and pin: ca. 2,5 g

Total weight of chain: ca. 0,51 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order Nr.: P2-10-001


Mehr anzeigen >>


Chain for the Cassis of Panzer II, Ausf. L "Luchs", scale 1:10

823,00
inkl. MwSt.
Versandkosten gelten nur für Deutschland
In den Warenkorb

Description:

It is an accurate copy of the original chain Kgs (63/360/90) even showing the structure of the sand-moulding process.

The delivered set of two chains consists of 2 x 96 chain links and 1 x 5 as reserve plus the necessary pins. The two chain are completely assembled. In total the set consists of 394 parts.

The chains are suitable for: Pz.Kpfw. II Ausf. L (Sd.Kfz. 123) A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data:

Width links with pin: ca. 36 mm

Weight link and pin: 7,5 g

Total weight of chain: 1,48 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

 

Order Nr.: LU-10-001

Mehr anzeigen >>


Chain for the Cassis of Panzer II, Ausf. L "Luchs", scale 1:10

823,00inkl. MwSt.
Versandkosten gelten nur für Deutschland

Description:

It is an accurate copy of the original chain Kgs (63/360/90) even showing the structure of the sand-moulding process.

The delivered set of two chains consists of 2 x 96 chain links and 1 x 5 as reserve plus the necessary pins. The two chain are completely assembled. In total the set consists of 394 parts.

The chains are suitable for: Pz.Kpfw. II Ausf. L (Sd.Kfz. 123) A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data:

Width links with pin: ca. 36 mm

Weight link and pin: 7,5 g

Total weight of chain: 1,48 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

 

Order Nr.: LU-10-001


Mehr anzeigen >>


Chain for the Cassis of Mark III "Panzer III", scale 1:10

766,00
inkl. MwSt.
Versandkosten gelten nur für Deutschland
In den Warenkorb

Description:

It is an accurate copy of the original chain Kgs (61/400/120) even showing the structure of the sand-moulding process and the hollow-casting of the lead cog.

The delivered set of two chains consists of 2 x 93 chain links and 1 x 14 as reserve plus the necessary pins. The two chain are completely assembled. In total the set consists of 399 parts.

The chains are suitable for: Pz.Kpfw. III Ausf. H-N (Sd.Kfz. 141- 141/3), Sturmgeschütz III Ausf. B-G, F8 (Sd.Kfz. 142-142/2). A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data:

Width links with pin: ca. 40 mm

Weight link and pin: ca. 9,0 g

Total weight of chain: ca. 1,8 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order Nr.: P3-10-001

Mehr anzeigen >>


Chain for the Cassis of Mark III "Panzer III", scale 1:10

766,00inkl. MwSt.
Versandkosten gelten nur für Deutschland

Description:

It is an accurate copy of the original chain Kgs (61/400/120) even showing the structure of the sand-moulding process and the hollow-casting of the lead cog.

The delivered set of two chains consists of 2 x 93 chain links and 1 x 14 as reserve plus the necessary pins. The two chain are completely assembled. In total the set consists of 399 parts.

The chains are suitable for: Pz.Kpfw. III Ausf. H-N (Sd.Kfz. 141- 141/3), Sturmgeschütz III Ausf. B-G, F8 (Sd.Kfz. 142-142/2). A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data:

Width links with pin: ca. 40 mm

Weight link and pin: ca. 9,0 g

Total weight of chain: ca. 1,8 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order Nr.: P3-10-001


Mehr anzeigen >>


Chain for the Cassis of Mark IV "Panzer IV", scale 1:10

795,90
inkl. MwSt.
Versandkosten gelten nur für Deutschland
In den Warenkorb

Description:

It is an accurate copy of the original chain Kgs (61/400/120) even showing the structure of the sand-moulding process, and the hollow-casting of the lead cog.

The delivered set of two chains consists of 2 x 99 chain links and 1 x 10 as reserve plus the necessary pins. The two chain are completely assembled. In total the set consists of 415 parts.

The chains are suitable for: Pz.Kpfw. IV Ausf. F (Sd.Kfz. 161), Pz.Kpfw. IV Ausf. F2 (Sd.Kfz. 161), Pz.Kpfw. IV Ausf. G,H;J (Sd.Kfz. 161/2), Sturmgeschütz IV (Sd.Kfz. 167), Jagdpanzer IV, (Sd.Kfz. 162), Nashorn bzw. Hornisse (Sd.Kfz. 164), Heuschrecke (Sd.Kfz. 165/1), Hummel (Sd.Kfz. 165), Brummbär (Sd.Kfz. 166), Ostwind und Möbelwagen (Sd.Kfz. 161/3), Wirbelwind (Sd.Kfz. 161/4), Kugelblitz.

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data:

Width links with pin: ca. 40 mm

Weight link and pin: ca. 9,0 g

Total weight of chain: ca. 1,9 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order Nr.: P4-10-001

Mehr anzeigen >>


Chain for the Cassis of Mark IV "Panzer IV", scale 1:10

795,90inkl. MwSt.
Versandkosten gelten nur für Deutschland

Description:

It is an accurate copy of the original chain Kgs (61/400/120) even showing the structure of the sand-moulding process, and the hollow-casting of the lead cog.

The delivered set of two chains consists of 2 x 99 chain links and 1 x 10 as reserve plus the necessary pins. The two chain are completely assembled. In total the set consists of 415 parts.

The chains are suitable for: Pz.Kpfw. IV Ausf. F (Sd.Kfz. 161), Pz.Kpfw. IV Ausf. F2 (Sd.Kfz. 161), Pz.Kpfw. IV Ausf. G,H;J (Sd.Kfz. 161/2), Sturmgeschütz IV (Sd.Kfz. 167), Jagdpanzer IV, (Sd.Kfz. 162), Nashorn bzw. Hornisse (Sd.Kfz. 164), Heuschrecke (Sd.Kfz. 165/1), Hummel (Sd.Kfz. 165), Brummbär (Sd.Kfz. 166), Ostwind und Möbelwagen (Sd.Kfz. 161/3), Wirbelwind (Sd.Kfz. 161/4), Kugelblitz.

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data:

Width links with pin: ca. 40 mm

Weight link and pin: ca. 9,0 g

Total weight of chain: ca. 1,9 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order Nr.: P4-10-001


Mehr anzeigen >>


"Eastern Chain" for the Cassis of Mark III "Panzer III", scale 1:10

950,00
inkl. MwSt.
Versandkosten gelten nur für Deutschland
In den Warenkorb

The normal chains of tanks III and IV for operation in Russia were to small, that is exhibited too much ground pressure. Therefore in the spring 1944 the "Eastern Chain" (Ostkette) was introduced having a width increase of 18 cm, other features being unchanged.

 

Description:

It is an accurate copy of the original even showing the structure of the sand-moulding process, and the hollow-casting of the lead cog.

The delivered set of two chains consists of 2 x 93 chain links and 2 x 4 as reserve plus the necessary pins. The two chain are completely assembled. In total the set consists of 386 parts.

The chains are suitable for: Pz.Kpfw. III Ausf. H-N (Sd.Kfz. 141- 141/3), Sturmgeschütz III Ausf. B-G, F8 (Sd.Kfz. 142-142/2).

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data:

Width links with pin: ca. 57 mm

Weight link and pin: ca. 12,3 g

Total weight of chain: ca. 2,5 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order Nr.: P3-10-O02

Mehr anzeigen >>


"Eastern Chain" for the Cassis of Mark III "Panzer III", scale 1:10

950,00inkl. MwSt.
Versandkosten gelten nur für Deutschland

The normal chains of tanks III and IV for operation in Russia were to small, that is exhibited too much ground pressure. Therefore in the spring 1944 the "Eastern Chain" (Ostkette) was introduced having a width increase of 18 cm, other features being unchanged.

 

Description:

It is an accurate copy of the original even showing the structure of the sand-moulding process, and the hollow-casting of the lead cog.

The delivered set of two chains consists of 2 x 93 chain links and 2 x 4 as reserve plus the necessary pins. The two chain are completely assembled. In total the set consists of 386 parts.

The chains are suitable for: Pz.Kpfw. III Ausf. H-N (Sd.Kfz. 141- 141/3), Sturmgeschütz III Ausf. B-G, F8 (Sd.Kfz. 142-142/2).

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data:

Width links with pin: ca. 57 mm

Weight link and pin: ca. 12,3 g

Total weight of chain: ca. 2,5 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order Nr.: P3-10-O02


Mehr anzeigen >>


"Eastern Chain" for the Cassis of Mark IV "Panzer IV", scale 1:10

1.008,76
inkl. MwSt.
Versandkosten gelten nur für Deutschland
In den Warenkorb

The normal chains of tanks III and IV for operation in Russia were to small, that is exhibited too much ground pressure. Therefore in the spring 1944 the "Eastern Chain" (Ostkette) was introduced having a width increase of 18 cm, other features being unchanged.

 

Description:

It is an accurate copy of the original even showing the structure of the sand-moulding process, and the hollow-casting of the lead cog.

The delivered set of two chains consists of 2 x 99 chain links and 2 x 4 as reserve plus the necessary pins. The two chain are completely assembled. In total the set consists of 410 parts.

The chains are suitable for: Pz.Kpfw. IV Ausf. F (Sd.Kfz. 161), Pz.Kpfw. IV Ausf. F2 (Sd.Kfz. 161), Pz.Kpfw. IV Ausf. G,H;J (Sd.Kfz. 161/2), Sturmgeschütz IV (Sd.Kfz. 167), Jagdpanzer IV, (Sd.Kfz. 162), Nashorn bzw. Hornisse (Sd.Kfz. 164), Heuschrecke (Sd.Kfz. 165/1), Hummel (Sd.Kfz. 165), Brummbär (Sd.Kfz. 166), Ostwind und Möbelwagen (Sd.Kfz. 161/3), Wirbelwind (Sd.Kfz. 161/4), Kugelblitz.

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data:

Width links with pin: ca. 57 mm

Weight link and pin: ca. 12,3 g

Total weight of chain: ca. 2,6 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

 

Order Nr.: P4-10-O02

Mehr anzeigen >>


"Eastern Chain" for the Cassis of Mark IV "Panzer IV", scale 1:10

1.008,76inkl. MwSt.
Versandkosten gelten nur für Deutschland

The normal chains of tanks III and IV for operation in Russia were to small, that is exhibited too much ground pressure. Therefore in the spring 1944 the "Eastern Chain" (Ostkette) was introduced having a width increase of 18 cm, other features being unchanged.

 

Description:

It is an accurate copy of the original even showing the structure of the sand-moulding process, and the hollow-casting of the lead cog.

The delivered set of two chains consists of 2 x 99 chain links and 2 x 4 as reserve plus the necessary pins. The two chain are completely assembled. In total the set consists of 410 parts.

The chains are suitable for: Pz.Kpfw. IV Ausf. F (Sd.Kfz. 161), Pz.Kpfw. IV Ausf. F2 (Sd.Kfz. 161), Pz.Kpfw. IV Ausf. G,H;J (Sd.Kfz. 161/2), Sturmgeschütz IV (Sd.Kfz. 167), Jagdpanzer IV, (Sd.Kfz. 162), Nashorn bzw. Hornisse (Sd.Kfz. 164), Heuschrecke (Sd.Kfz. 165/1), Hummel (Sd.Kfz. 165), Brummbär (Sd.Kfz. 166), Ostwind und Möbelwagen (Sd.Kfz. 161/3), Wirbelwind (Sd.Kfz. 161/4), Kugelblitz.

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data:

Width links with pin: ca. 57 mm

Weight link and pin: ca. 12,3 g

Total weight of chain: ca. 2,6 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

 

Order Nr.: P4-10-O02


Mehr anzeigen >>


Chain for the Cassis of Mark V, "Panther", scale 1:10

990,00
inkl. MwSt.
Versandkosten gelten nur für Deutschland
In den Warenkorb

Description:

It is an accurate copy of the original chain Kgs 64/660/150 even showing the structure of the sand-moulding process. As with the original are the lead cogs perforated.

The delivered set of two chains consists of 2 x 86 chain links and 2 x 6 as reserve plus the necessary pins. The two chain are completely assembled. In total the set consists of 368 parts.

The chains are suitable for: Pz.Kpfw. V „Panther“ Ausf. D,A,G, F (Sd.Kfz. 171), Jgd.Pz. V „Jagdpanther“ (Sd.Kfz. 173) und Bergepanzer „Panther“ (Sd.Kfz. 179).

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data:

Width links with pin: ca. 66 mm

Weight link and pin: ca. 22,0 g

Total weight of chain: ca. 4,1 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

 

Order Nr.: PA-10-001

Mehr anzeigen >>


Chain for the Cassis of Mark V, "Panther", scale 1:10

990,00inkl. MwSt.
Versandkosten gelten nur für Deutschland

Description:

It is an accurate copy of the original chain Kgs 64/660/150 even showing the structure of the sand-moulding process. As with the original are the lead cogs perforated.

The delivered set of two chains consists of 2 x 86 chain links and 2 x 6 as reserve plus the necessary pins. The two chain are completely assembled. In total the set consists of 368 parts.

The chains are suitable for: Pz.Kpfw. V „Panther“ Ausf. D,A,G, F (Sd.Kfz. 171), Jgd.Pz. V „Jagdpanther“ (Sd.Kfz. 173) und Bergepanzer „Panther“ (Sd.Kfz. 179).

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data:

Width links with pin: ca. 66 mm

Weight link and pin: ca. 22,0 g

Total weight of chain: ca. 4,1 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

 

Order Nr.: PA-10-001


Mehr anzeigen >>


Chains for the chassis of Mark IV "Tiger I", scale 1:10

1.240,00
inkl. MwSt.
Versandkosten gelten nur für Deutschland
In den Warenkorb

What is the Cause of the unsymmetric geometry of the Tiger I chain links?

The Tank VI Design B (VK 3601(H)) was the precursor of the Tiger I. This armoured vehicle weighed ca. 36 tons (metric) and had a chain width of 520 mm. It was found that this tank was not able to support a 8,8 cm canon. Therefore further persuance of this type was abandoned. To shorten the time to develope the Tiger I many of the Mark VI Design B components were incorporated in the Tiger I. One of these was the chain as it was too small for the 56 tons Tiger I. Therefore on one side the links were broadened by 205 mm and reinforcement bars added at the position of the cog weel contact.

 

Description:

Accurate copy of the original chain Kgs 63/725/130 with casted diametrical studs. Sand-casting structure. As with the original are the lead cogs perforated. Copy of the reinforcement bar.

The delivered set of two chains consists of 2 x 96 chain links and 1 x 12 as reserve plus the necessary pins. The two chain are completely assembled. In total the set consists of 408 parts.

The chains are suitable for: Pz.Kpfw. Tiger I, Ausf. E, (Sd.Kfz. 181), Stu.Pz. VI, „Sturmtiger“.

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data:

Width links with pin: ca. 72,5 mm

Weight link and pin: ca. 28,0 g

Total weight of chain: ca. 6,1 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel

 

Order Nr.: T1-10-001

Mehr anzeigen >>


Chains for the chassis of Mark IV "Tiger I", scale 1:10

1.240,00inkl. MwSt.
Versandkosten gelten nur für Deutschland

What is the Cause of the unsymmetric geometry of the Tiger I chain links?

The Tank VI Design B (VK 3601(H)) was the precursor of the Tiger I. This armoured vehicle weighed ca. 36 tons (metric) and had a chain width of 520 mm. It was found that this tank was not able to support a 8,8 cm canon. Therefore further persuance of this type was abandoned. To shorten the time to develope the Tiger I many of the Mark VI Design B components were incorporated in the Tiger I. One of these was the chain as it was too small for the 56 tons Tiger I. Therefore on one side the links were broadened by 205 mm and reinforcement bars added at the position of the cog weel contact.

 

Description:

Accurate copy of the original chain Kgs 63/725/130 with casted diametrical studs. Sand-casting structure. As with the original are the lead cogs perforated. Copy of the reinforcement bar.

The delivered set of two chains consists of 2 x 96 chain links and 1 x 12 as reserve plus the necessary pins. The two chain are completely assembled. In total the set consists of 408 parts.

The chains are suitable for: Pz.Kpfw. Tiger I, Ausf. E, (Sd.Kfz. 181), Stu.Pz. VI, „Sturmtiger“.

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data:

Width links with pin: ca. 72,5 mm

Weight link and pin: ca. 28,0 g

Total weight of chain: ca. 6,1 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel

 

Order Nr.: T1-10-001


Mehr anzeigen >>


Chains for the Chassis of Mark IV "Tiger I", scale 1:10 The earlier design was without “Querstollen”

1.240,00
inkl. MwSt.
Versandkosten gelten nur für Deutschland
In den Warenkorb

What is the Cause of the unsymmetric geometry of the Tiger I chain links?

The Tank VI Design B (VK 3601(H)) was the precursor of the Tiger I. This armoured vehicle weighed ca. 36 tons (metric) and had a chain width of 520 mm. It was found that this tank was not able to support a 8,8 cm canon. Therefore further persuance of this type was abandoned. To shorten the time to develope the Tiger I many of the Mark VI Design B components were incorporated in the Tiger I. One of these was the chain as it was too small for the 56 tons Tiger I. Therefore on one side the links were broadened by 205 mm and reinforcement bars added at the position of the cog weel contact.

 

Description:

Accurate copy of the original chain Kgs 63/725/130.Frühe Ausführung. Sand-casting structure. As with the original are the lead cogs perforated.

Copy of the reinforcement bar

The delivered set of two chains consists of 2 x 96 chain links and 1 x 12 as reserve plus the necessary pins.

The two chain are completely assembled.

In total the set consists of 408 parts.

The chains are suitable for: Pz.Kpfw. Tiger I, Ausf. E, (Sd.Kfz. 181), Stu.Pz. VI, „Sturmtiger“

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data: M10

Width links with pin: ca. 72,5 mm

Weight link and pin: ca. 28,0 g

Total weight of chain: ca. 6,1 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order Nr.: T1-10-G01

Mehr anzeigen >>


Chains for the Chassis of Mark IV "Tiger I", scale 1:10 The earlier design was without “Querstollen”

1.240,00inkl. MwSt.
Versandkosten gelten nur für Deutschland

What is the Cause of the unsymmetric geometry of the Tiger I chain links?

The Tank VI Design B (VK 3601(H)) was the precursor of the Tiger I. This armoured vehicle weighed ca. 36 tons (metric) and had a chain width of 520 mm. It was found that this tank was not able to support a 8,8 cm canon. Therefore further persuance of this type was abandoned. To shorten the time to develope the Tiger I many of the Mark VI Design B components were incorporated in the Tiger I. One of these was the chain as it was too small for the 56 tons Tiger I. Therefore on one side the links were broadened by 205 mm and reinforcement bars added at the position of the cog weel contact.

 

Description:

Accurate copy of the original chain Kgs 63/725/130.Frühe Ausführung. Sand-casting structure. As with the original are the lead cogs perforated.

Copy of the reinforcement bar

The delivered set of two chains consists of 2 x 96 chain links and 1 x 12 as reserve plus the necessary pins.

The two chain are completely assembled.

In total the set consists of 408 parts.

The chains are suitable for: Pz.Kpfw. Tiger I, Ausf. E, (Sd.Kfz. 181), Stu.Pz. VI, „Sturmtiger“

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data: M10

Width links with pin: ca. 72,5 mm

Weight link and pin: ca. 28,0 g

Total weight of chain: ca. 6,1 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order Nr.: T1-10-G01


Mehr anzeigen >>


Transportation chains for the chassis of Mark IV "Tiger I", scale 1:10

884,00
inkl. MwSt.
Versandkosten gelten nur für Deutschland
In den Warenkorb

Description:

Accurate copy of the original chain Kgs 63/520/130 with casted diametrical studs. Sand-casting structure. As with the original are the lead cogs perforated.

The delivered set of two chains consists of 2 x 96 chain links plus the necessary pins. The two chain are completely assembled. In total the set consists of 384 parts.

The chains are suitable for: Pz.Kpfw. Tiger I, Ausf. E, (Sd.Kfz. 181), Stu.Pz. VI, „Sturmtiger“.

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data:

Width links with pin: ca. 52,0 mm

Weight link and pin: ca. 20,1 g

Total weight of chain: ca. 3,8 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order Nr.: T1-10-V01

Mehr anzeigen >>


Transportation chains for the chassis of Mark IV "Tiger I", scale 1:10

884,00inkl. MwSt.
Versandkosten gelten nur für Deutschland

Description:

Accurate copy of the original chain Kgs 63/520/130 with casted diametrical studs. Sand-casting structure. As with the original are the lead cogs perforated.

The delivered set of two chains consists of 2 x 96 chain links plus the necessary pins. The two chain are completely assembled. In total the set consists of 384 parts.

The chains are suitable for: Pz.Kpfw. Tiger I, Ausf. E, (Sd.Kfz. 181), Stu.Pz. VI, „Sturmtiger“.

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data:

Width links with pin: ca. 52,0 mm

Weight link and pin: ca. 20,1 g

Total weight of chain: ca. 3,8 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order Nr.: T1-10-V01


Mehr anzeigen >>


Chain for the chassis of Mark VI "Tiger II", scale 1:10

1.476,00
inkl. MwSt.
Versandkosten gelten nur für Deutschland
In den Warenkorb

The Chain of the Tiger II was one of a very few that was composed of two different types of links. One was the lead- or guide link with two leads- or guide cogs (-teeth). The tank moved on these chain links. The other type of link is the connection piece to the above. The cogs of the weels that drive the chain only connect with the lead links. Open space between these cogs were introduced to avoid contact with the connection links. The two cogs of the lead links were different length. The one of the inside was one cm shorter so as not to collide with the cog wheel that drives the vehicle.

 

Description:

Accurate copy of the original chain - Kgs 73/800/52 - consisting of lead and connection links. The two lead cogs of different lengths are, as with the original hollow castings.

The delivered set of two chains consists of 2 x 92 chain links and 2 x 8 as reserve plus the necessary pins. The two chain are completely assembled. In total the set consists of 400 parts.

The chains are suitable for: Pz.Kpfw.VII, Tiger II, Ausf. B, „Königstiger“ (Sd.Kfz. 182), Jgd.Pz. VII, „Jagdtiger“ (Sd.Kfz. 185 und 186).

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data:

Width links with pin: ca. 80,0 mm

Weight lead link and pin: ca. 40,0 g

Weight connection link and pin: ca. 25,0 g

Total weight of chain: ca. 7,1 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order Nr.: T2-10-001

Mehr anzeigen >>


Chain for the chassis of Mark VI "Tiger II", scale 1:10

1.476,00inkl. MwSt.
Versandkosten gelten nur für Deutschland

The Chain of the Tiger II was one of a very few that was composed of two different types of links. One was the lead- or guide link with two leads- or guide cogs (-teeth). The tank moved on these chain links. The other type of link is the connection piece to the above. The cogs of the weels that drive the chain only connect with the lead links. Open space between these cogs were introduced to avoid contact with the connection links. The two cogs of the lead links were different length. The one of the inside was one cm shorter so as not to collide with the cog wheel that drives the vehicle.

 

Description:

Accurate copy of the original chain - Kgs 73/800/52 - consisting of lead and connection links. The two lead cogs of different lengths are, as with the original hollow castings.

The delivered set of two chains consists of 2 x 92 chain links and 2 x 8 as reserve plus the necessary pins. The two chain are completely assembled. In total the set consists of 400 parts.

The chains are suitable for: Pz.Kpfw.VII, Tiger II, Ausf. B, „Königstiger“ (Sd.Kfz. 182), Jgd.Pz. VII, „Jagdtiger“ (Sd.Kfz. 185 und 186).

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data:

Width links with pin: ca. 80,0 mm

Weight lead link and pin: ca. 40,0 g

Weight connection link and pin: ca. 25,0 g

Total weight of chain: ca. 7,1 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order Nr.: T2-10-001


Mehr anzeigen >>


Chains for the Jgd.Pz. Tiger (P) "Elefant", scale 1:10

1.234,00
inkl. MwSt.
Versandkosten gelten nur für Deutschland
In den Warenkorb

Description:

Accurate copy of the original chain - Kgs 64/640/130 - consisting of lead and connection links.

The lead cog is, as with the original hollow castings.

The delivered set of two chains consists of 2 x 108 chain links and 1 x 4 as reserve plus the necessary pins. The two chain are completely assembled. In total the set consists of 444 parts.

The chains are suitable for: Jgd.Pz. Tiger (P) "Elefant".

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data: M10

Width links with pin: ca. 64,0 mm

Weight lead link and pin: ca. 26,1 g

Weight connection link and pin: ca. 21,6 g

Total weight of chain: ca. 5,1 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order-Nr.: EL-10-001

Mehr anzeigen >>


Chains for the Jgd.Pz. Tiger (P) "Elefant", scale 1:10

1.234,00inkl. MwSt.
Versandkosten gelten nur für Deutschland

Description:

Accurate copy of the original chain - Kgs 64/640/130 - consisting of lead and connection links.

The lead cog is, as with the original hollow castings.

The delivered set of two chains consists of 2 x 108 chain links and 1 x 4 as reserve plus the necessary pins. The two chain are completely assembled. In total the set consists of 444 parts.

The chains are suitable for: Jgd.Pz. Tiger (P) "Elefant".

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data: M10

Width links with pin: ca. 64,0 mm

Weight lead link and pin: ca. 26,1 g

Weight connection link and pin: ca. 21,6 g

Total weight of chain: ca. 5,1 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order-Nr.: EL-10-001


Mehr anzeigen >>


Chains for the tank E 100, scale 1:10

1.751,00
inkl. MwSt.
Versandkosten gelten nur für Deutschland
In den Warenkorb

Description:

Accurate copy of the original chain, consisting of one lead and one large and two small connection links.

The two lead cogs, as with the original hollow castings.

The delivered set of two chains consists of 2 x 53 lead links, 2 x 53 conection links (large) and 2x 106 conection links (small) plus the necessary pins. The two chain are completely assembled. In total the set consists of 636 parts.

The chains are suitable for: E100.

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.


Technical data: M10

Width links with pin: ca. 100,0 mm

Weight lead link and pin: ca. 49,2 g

Weight large connection link and pin: ca. 17,8 g

Weight small connection link: ca. 5,0 g

Total weight of chain: ca. 8,1 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order-Nr: E1-16-001

Mehr anzeigen >>


Chains for the tank E 100, scale 1:10

1.751,00inkl. MwSt.
Versandkosten gelten nur für Deutschland

Description:

Accurate copy of the original chain, consisting of one lead and one large and two small connection links.

The two lead cogs, as with the original hollow castings.

The delivered set of two chains consists of 2 x 53 lead links, 2 x 53 conection links (large) and 2x 106 conection links (small) plus the necessary pins. The two chain are completely assembled. In total the set consists of 636 parts.

The chains are suitable for: E100.

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.


Technical data: M10

Width links with pin: ca. 100,0 mm

Weight lead link and pin: ca. 49,2 g

Weight large connection link and pin: ca. 17,8 g

Weight small connection link: ca. 5,0 g

Total weight of chain: ca. 8,1 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order-Nr: E1-16-001


Mehr anzeigen >>


Chains for the Jgd.Pz. 38 t "Hetzer", scale 1:10

870,00
inkl. MwSt.
Versandkosten gelten nur für Deutschland
In den Warenkorb

Description:

It is an accurate copy of the original chain.

The delivered set of two chains consists of 2 x 96 chain links and 1 x 7 as reserve plus the necessary pins.

The two chain are completely assembled.

In total the set consists of 398 parts.

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data: M10

Width links with pin: ca. 35,0 mm

Weight link and pin: ca. 6,7 g

Total weight of chain: ca. 1,3 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order Nr.: HE-10-001

Mehr anzeigen >>


Chains for the Jgd.Pz. 38 t "Hetzer", scale 1:10

870,00inkl. MwSt.
Versandkosten gelten nur für Deutschland

Description:

It is an accurate copy of the original chain.

The delivered set of two chains consists of 2 x 96 chain links and 1 x 7 as reserve plus the necessary pins.

The two chain are completely assembled.

In total the set consists of 398 parts.

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data: M10

Width links with pin: ca. 35,0 mm

Weight link and pin: ca. 6,7 g

Total weight of chain: ca. 1,3 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order Nr.: HE-10-001


Mehr anzeigen >>


Chains for Sfl. (self-propelled carriage) "Marder III" and Panzer 38 (t), scale 1:10

798,00
inkl. MwSt.
Versandkosten gelten nur für Deutschland
In den Warenkorb

Description:

It is an accurate copy of the original chain.

The delivered set of two chains consists of 2 x 89 chain links and 1 x 5 as reserve plus the necessary pins.

The two chain are completely assembled.

In total the set consists of 366 parts.

The chains are suitable for: Sfl. (self-propelled carriage) „Marder III“ and Panzer 38 (t).

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data: M10

Width links with pin: ca. 29,0 mm

Weight link and pin: ca. 5,8 g

Total weight of chain: ca. 1,1 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order Nr.: MA-10-001

Mehr anzeigen >>


Chains for Sfl. (self-propelled carriage) "Marder III" and Panzer 38 (t), scale 1:10

798,00inkl. MwSt.
Versandkosten gelten nur für Deutschland

Description:

It is an accurate copy of the original chain.

The delivered set of two chains consists of 2 x 89 chain links and 1 x 5 as reserve plus the necessary pins.

The two chain are completely assembled.

In total the set consists of 366 parts.

The chains are suitable for: Sfl. (self-propelled carriage) „Marder III“ and Panzer 38 (t).

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data: M10

Width links with pin: ca. 29,0 mm

Weight link and pin: ca. 5,8 g

Total weight of chain: ca. 1,1 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order Nr.: MA-10-001


Mehr anzeigen >>


Chain for the Chassis of T34/76 tank, scale 1:10

876,00
inkl. MwSt.
Versandkosten gelten nur für Deutschland
In den Warenkorb

Description:

Accurate copy of the original chain - consisting of lead and connection links. The lead cogis, as with the original hollow castings.

The delivered set of two chains consists of 2 x 76 chain links and 1 x 6 as reserve plus the necessary pins. The two chain are completely assembled. In total the set consists of 316 parts.

The chains are suitable for: T34/76, T34/85, SU-85, SU-100 und SU-122.

 

Technical data: M10

Width links with pin: ca. 50,0 mm

Weight lead link and pin: ca. 16,3 g

Weight connection link and pin: ca. 14,1 g

Total weight of chain: ca. 2,4 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

 

Order Nr.: T3-10-001


Mehr anzeigen >>


Chain for the Chassis of T34/76 tank, scale 1:10

876,00inkl. MwSt.
Versandkosten gelten nur für Deutschland

Description:

Accurate copy of the original chain - consisting of lead and connection links. The lead cogis, as with the original hollow castings.

The delivered set of two chains consists of 2 x 76 chain links and 1 x 6 as reserve plus the necessary pins. The two chain are completely assembled. In total the set consists of 316 parts.

The chains are suitable for: T34/76, T34/85, SU-85, SU-100 und SU-122.

 

Technical data: M10

Width links with pin: ca. 50,0 mm

Weight lead link and pin: ca. 16,3 g

Weight connection link and pin: ca. 14,1 g

Total weight of chain: ca. 2,4 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

 

Order Nr.: T3-10-001



Mehr anzeigen >>


Chain for the Chassis of Josef Stalin tank, scale 1:10

1.056,00
inkl. MwSt.
Versandkosten gelten nur für Deutschland
In den Warenkorb

Description:

Accurate copy of the original chain. The lead cogis, as with the original hollow castings.

The delivered set of two chains consists of 2 x 89 chain links and 1 x 6 as reserve plus the necessary pins. The two chain are completely assembled. In total the set consists of 368 parts.

The chains are suitable for:: IS-1, IS-2, IS-3 und SU-122.

 

Technical data: M10

Width links with pin: ca. 65,0 mm

Weight chain link and pin: ca. 26,3 g

Total weight of chain: ca. 4,6 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order Nr: JS-10-001

Mehr anzeigen >>


Chain for the Chassis of Josef Stalin tank, scale 1:10

1.056,00inkl. MwSt.
Versandkosten gelten nur für Deutschland

Description:

Accurate copy of the original chain. The lead cogis, as with the original hollow castings.

The delivered set of two chains consists of 2 x 89 chain links and 1 x 6 as reserve plus the necessary pins. The two chain are completely assembled. In total the set consists of 368 parts.

The chains are suitable for:: IS-1, IS-2, IS-3 und SU-122.

 

Technical data: M10

Width links with pin: ca. 65,0 mm

Weight chain link and pin: ca. 26,3 g

Total weight of chain: ca. 4,6 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order Nr: JS-10-001


Mehr anzeigen >>