Chains, scale 1:15, 1:16

Chain for the Chassis of Mark V, "Panther", scale 1:15

880,00
inkl. MwSt.
Versandkosten gelten nur für Deutschland
In den Warenkorb

Description:

It is an accurate copy of the original chain Kgs 64/660/150 even showing the structure of the sand-moulding process. As with the original are the lead cogs perforated.

The delivered set of two chains consists of 2 x 86 chain links and 2 x 6 as reserve plus the necessary pins.

The two chain are completely assembled.

In total the set consists of 368 parts.

The chains are suitable for: Pz.Kpfw. V „Panther“ Ausf. D,A,G, F (Sd.Kfz. 171), Jgd.Pz. V „Jagdpanther“ (Sd.Kfz. 173) und Bergepanzer „Panther“ (Sd.Kfz. 179).

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data:

Width links with pin: ca. 44 mm

Weight link and pin: ca. 17,2 g

Total weight of chain: ca. 1,3 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order Nr.: PA-15-001

Mehr anzeigen >>


Chain for the Chassis of Mark V, "Panther", scale 1:15

880,00inkl. MwSt.
Versandkosten gelten nur für Deutschland

Description:

It is an accurate copy of the original chain Kgs 64/660/150 even showing the structure of the sand-moulding process. As with the original are the lead cogs perforated.

The delivered set of two chains consists of 2 x 86 chain links and 2 x 6 as reserve plus the necessary pins.

The two chain are completely assembled.

In total the set consists of 368 parts.

The chains are suitable for: Pz.Kpfw. V „Panther“ Ausf. D,A,G, F (Sd.Kfz. 171), Jgd.Pz. V „Jagdpanther“ (Sd.Kfz. 173) und Bergepanzer „Panther“ (Sd.Kfz. 179).

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data:

Width links with pin: ca. 44 mm

Weight link and pin: ca. 17,2 g

Total weight of chain: ca. 1,3 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order Nr.: PA-15-001


Mehr anzeigen >>


Chains for the Chassis of Mark IV "Tiger I", scale 1:16 The earlier design was without “Querstollen”

920,00
inkl. MwSt.
Versandkosten gelten nur für Deutschland
In den Warenkorb

What is the Cause of the unsymmetric geometry of the Tiger I chain links?

The Tank VI Design B (VK 3601(H)) was the precursor of the Tiger I. This armoured vehicle weighed ca. 36 tons (metric) and had a chain width of 520 mm. It was found that this tank was not able to support a 8,8 cm canon. Therefore further persuance of this type was abandoned. To shorten the time to develope the Tiger I many of the Mark VI Design B components were incorporated in the Tiger I. One of these was the chain as it was too small for the 56 tons Tiger I. Therefore on one side the links were broadened by 205 mm and reinforcement bars added at the position of the cog weel contact.

 

Description:

Accurate copy of the original chain Kgs 63/725/130.Frühe Ausführung. Sand-casting structure. As with the original are the lead cogs perforated.

Copy of the reinforcement bar

The delivered set of two chains consists of 2 x 96 chain links and 1 x 12 as reserve plus the necessary pins.

The two chain are completely assembled.

In total the set consists of 408 parts.

The chains are suitable for: Pz.Kpfw. Tiger I, Ausf. E, (Sd.Kfz. 181), Stu.Pz. VI, „Sturmtiger“

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data:

Width links with pin: ca. 45,3 mm

Weight link and pin: ca. 7,7 g

Total weight of chain: ca. 1,7 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order Nr.: T1-16-G01

Mehr anzeigen >>


Chains for the Chassis of Mark IV "Tiger I", scale 1:16 The earlier design was without “Querstollen”

920,00inkl. MwSt.
Versandkosten gelten nur für Deutschland

What is the Cause of the unsymmetric geometry of the Tiger I chain links?

The Tank VI Design B (VK 3601(H)) was the precursor of the Tiger I. This armoured vehicle weighed ca. 36 tons (metric) and had a chain width of 520 mm. It was found that this tank was not able to support a 8,8 cm canon. Therefore further persuance of this type was abandoned. To shorten the time to develope the Tiger I many of the Mark VI Design B components were incorporated in the Tiger I. One of these was the chain as it was too small for the 56 tons Tiger I. Therefore on one side the links were broadened by 205 mm and reinforcement bars added at the position of the cog weel contact.

 

Description:

Accurate copy of the original chain Kgs 63/725/130.Frühe Ausführung. Sand-casting structure. As with the original are the lead cogs perforated.

Copy of the reinforcement bar

The delivered set of two chains consists of 2 x 96 chain links and 1 x 12 as reserve plus the necessary pins.

The two chain are completely assembled.

In total the set consists of 408 parts.

The chains are suitable for: Pz.Kpfw. Tiger I, Ausf. E, (Sd.Kfz. 181), Stu.Pz. VI, „Sturmtiger“

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data:

Width links with pin: ca. 45,3 mm

Weight link and pin: ca. 7,7 g

Total weight of chain: ca. 1,7 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order Nr.: T1-16-G01


Mehr anzeigen >>


Chain for the chassis of Mark VI "Tiger II", scale 1:16

880,00
inkl. MwSt.
Versandkosten gelten nur für Deutschland
In den Warenkorb

The Chain of the Tiger II was one of a very few that was composed of two different types of links. One was the lead- or guide link with two leads- or guide cogs (-teeth). The tank moved on these chain links. The other type of link is the connection piece to the above.

The cogs of the weels that drive the chain only connect with the lead links. Open space between these cogs were introduced to avoid contact with the connection links. The two cogs of the lead links were different length. The one of the inside was one cm shorter so as not to collide with the cog wheel that drives the vehicle.

 

Description:

Accurate copy of the original chain - Kgs 73/800/52 - consisting of lead and connection links. The two lead cogs of different lengths are, as with the original hollow castings.

The delivered set of two chains consists of 2 x 92 chain links and 2 x 8 as reserve plus the necessary pins. The two chain are completely assembled. In total the set consists of 400 parts.

The chains are suitable for: Pz.Kpfw.VII, Tiger II, Ausf. B, „Königstiger“ (Sd.Kfz. 182), Jgd.Pz. VII, „Jagdtiger“ (Sd.Kfz. 185 und 186)

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data:

Width links with pin: ca. 50,0 mm

Weight lead link and pin: ca. 11,0 g

Weight connection link and pin: ca. 6,0 g

Total weight of chain: ca. 1,7 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Mehr anzeigen >>


Chain for the chassis of Mark VI "Tiger II", scale 1:16

880,00inkl. MwSt.
Versandkosten gelten nur für Deutschland

The Chain of the Tiger II was one of a very few that was composed of two different types of links. One was the lead- or guide link with two leads- or guide cogs (-teeth). The tank moved on these chain links. The other type of link is the connection piece to the above.

The cogs of the weels that drive the chain only connect with the lead links. Open space between these cogs were introduced to avoid contact with the connection links. The two cogs of the lead links were different length. The one of the inside was one cm shorter so as not to collide with the cog wheel that drives the vehicle.

 

Description:

Accurate copy of the original chain - Kgs 73/800/52 - consisting of lead and connection links. The two lead cogs of different lengths are, as with the original hollow castings.

The delivered set of two chains consists of 2 x 92 chain links and 2 x 8 as reserve plus the necessary pins. The two chain are completely assembled. In total the set consists of 400 parts.

The chains are suitable for: Pz.Kpfw.VII, Tiger II, Ausf. B, „Königstiger“ (Sd.Kfz. 182), Jgd.Pz. VII, „Jagdtiger“ (Sd.Kfz. 185 und 186)

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data:

Width links with pin: ca. 50,0 mm

Weight lead link and pin: ca. 11,0 g

Weight connection link and pin: ca. 6,0 g

Total weight of chain: ca. 1,7 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.


Mehr anzeigen >>


Chains for the tank E 100, scale 1:16

1.224,00
inkl. MwSt.
Versandkosten gelten nur für Deutschland
In den Warenkorb

Description:

Accurate copy of the original chain, consisting of one lead and one large and two small connection links.

The two lead cogs, as with the original hollow castings.

The delivered set of two chains consists of 2 x 53 lead links, 2 x 53 conection links (large) and 2x 106 conection links (small) plus the necessary pins. The two chain are completely assembled. In total the set consists of 636 parts.

The chains are suitable for: E100.

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data:

Width links with pin: ca. 62,5 mm

Weight lead link and pin: ca. 12,5 g

Weight large connection link and pin: ca. 4,2 g

Weight small connection link: ca. 1,0 g

Total weight of chain: ca. 2,0 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order-Nr: E1-16-001

Mehr anzeigen >>


Chains for the tank E 100, scale 1:16

1.224,00inkl. MwSt.
Versandkosten gelten nur für Deutschland

Description:

Accurate copy of the original chain, consisting of one lead and one large and two small connection links.

The two lead cogs, as with the original hollow castings.

The delivered set of two chains consists of 2 x 53 lead links, 2 x 53 conection links (large) and 2x 106 conection links (small) plus the necessary pins. The two chain are completely assembled. In total the set consists of 636 parts.

The chains are suitable for: E100.

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data:

Width links with pin: ca. 62,5 mm

Weight lead link and pin: ca. 12,5 g

Weight large connection link and pin: ca. 4,2 g

Weight small connection link: ca. 1,0 g

Total weight of chain: ca. 2,0 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order-Nr: E1-16-001


Mehr anzeigen >>


670,00
inkl. MwSt.
Versandkosten gelten nur für Deutschland
In den Warenkorb

Chains for the Jgd.Pz. 38 t "Hetzer", scale 1:16

Description:

It is an accurate copy of the original chain.

The delivered set of two chains consists of 2 x 96 chain links and 1 x 7 as reserve plus the necessary pins.

The two chain are completely assembled.

In total the set consists of 398 parts.

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data:

Width links with pin: ca. 21,9 mm

Weight link and pin: ca. 1,7 g

Total weight of chain: ca. 0,35 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order Nr.: HE-16-001

Mehr anzeigen >>


Chains for the Jgd.Pz. 38 t "Hetzer", scale 1:16

670,00inkl. MwSt.
Versandkosten gelten nur für Deutschland

Description:

It is an accurate copy of the original chain.

The delivered set of two chains consists of 2 x 96 chain links and 1 x 7 as reserve plus the necessary pins.

The two chain are completely assembled.

In total the set consists of 398 parts.

A drawing of the cog-rim (impetus driving giving) whell is part of the delivery.

 

Technical data:

Width links with pin: ca. 21,9 mm

Weight link and pin: ca. 1,7 g

Total weight of chain: ca. 0,35 kg

Links are made of high strength brass (CuZn34Al2)

Pins are high quality stainless steel.

Order Nr.: HE-16-001


Mehr anzeigen >>